T4S Compliance Natural Gas Pipelines & CGD Network

20th - 21st December 2018 Mumbai

Course Description

Course Description:
1. Introduction of T4S
2. Why it is required for companies in natural gas and CGD?
3. T4S requirements in following stages of asset life cycle:
i.  Design consisting of Material and equipments specifications, welding procedures, piping system,
    components and fabrication, installation, testing and commissioning, safety requirements and
    control
ii. Operation and maintenance procedures including safety and corrosion control measures
4. Case study and group discussion
5. Quiz test 

Course Highlights:
The two days training on T4S requirement for natural gas and CGD network is aimed for improving
integrity and safety of natural gas pipeline and CGD network. ‘Technical Standards and Specifications
including Safety Standards’ (T4S) regulation was formulated by Petroleum and Natural Gas Regulatory
Board (PNGRB) under Petroleum and Natural Gas Regulatory Act 2006. Every pipeline operator is
required to comply with the T4S regulation. Penalty is also imposed by PNGRB if compliance is not done.
This training will focus on requirements of T4S for natural gas and CGD network in the selection of
materials and equipments and pipeline components, following procedures for welding, fabrication,
installation, testing and commissioning, operation and maintenance and corrosion control. The training will
also deal with case studies and common findings in T4S audit. Quiz test will also be conducted to test the
knowledge.

Course Benefits:
i. Familiarization with T4S requirements
ii. Taking corrective actions for complying T4S requirements
iii. Increasing knowledge in the field of pipeline integrity and corrosion control
iv. Improving integrity and safety of pipeline and CGD network
v. Cost control and improving brand image

Who Should Attend:
The training benefits middle level engineers in design, project and operation and maintenance in natural
gas and CGD network in complying requirements as per T4S.
Engineers from companies in natural gas pipeline and CGD network, project management consultancy,
third party inspection agency, executing agencies etc should attend this training to familiarize with T4S
requirements. 
 
 
For registration contact us on 022-62210100 or +91-7045544805 or email us on info@marcepinc.com

Training Agenda

Training Agenda For T4S Compliance Natural Gas Pipelines & CGD Network

• Know, what is T4S?
• Understand the importance of T4S
• Know critical check list
• Know T4S requirements for 
i. Materials and equipments
ii. Welding
iii. Piping system, components and fabrication
iv. Design, installation, testing and commissioning
v. Operation and maintenance
vi. Corrosion control
vii. Miscellaneous
• Case Studies & Group Discussion
 
 
For registration contact us on 022-62210100 or +91-7045544805 or email us on info@marcepinc.com

Course Director

Course Director : Mr. J N Agrawal is B Tech in Electrical Engineering and MBA in Marketing Management. He has more than 35 years experience in cross country oil and natural gas pipeline industry. He has worked in projects, construction, operation and maintenance, technical audit and safety. His specialized field is corrosion control and cathodic protection. He has served Oil India Ltd for 5 years and Gail India Ltd for 28 years. He retired in Aug 2015 and working as Consultant in corrosion control and cathodic protection through his consulting firm M/s Cathpro Consultant and imparting training on T4S and cathodic protection. He has done T4S audit for Gail Natural Gas Pipelines and CGD network of MNGL and AGL, safety audit of CGD network of CUGL and oil pipeline of IOCL and HPCL and ERDMP audit of HPCL oil pipeline. He has presented several papers in various conferences of NACE India chapter and ASME. He is Member of Icorr and CP3 from Icorr.
Share this Post: